Silk assembly
Mounting a silk or swing swing is easy.
It is easiest if you have an open wooden beam or branch (in a park or yard) around which strips (daisychain) can be wrapped.
Installation in the apartment requires additional equipment (hook and screws / dowels), tools and a little expertise. Of course, it is very important to know what kind of ceiling you have in the room where you are planning the installation.
The ceiling must be made of solid material, ideally concrete or wooden beam. Buildings often have reed and plaster ceilings (old construction) or block assembly (new construction), and one secondly, the ceilings for climbing are unfavorable because they are weak, ie. hollow. But there is a solution for that as well, because every building has supporting beams in the ceiling, whether they are made of wood or concrete. In case you have mounting blocks, you will need additional equipment for anchoring hollow blocks - Anchorfix, etc. but for this it is best to contact a professional.
1. When you have found the ideal place, mark where you will drill the screw holes
2. For drilling concrete you will need a hilti drill, while for a wooden beam you will need a drill bit
.
3. Concrete dowels are required for the concrete ceiling, while appropriate screws are screwed for the wooden beam.
4. Two hooks at a distance of about 35 cm from each other are recommended for mounting. Ropes or daisychain that come with the kit are attached to the hooks, as well as a carabiner over which you attach the rope swing and adjust the height as needed.
Since safety is always in the first place, it is best to contact a professional if you are not sure how to attach the hooks to the ceiling or you do not have the appropriate tools. This is just one of the ways in which it is possible to hang a swing, depending on what hooks and screws are available to you.
Komplet kuka za plafon
1000din
S obzirom da je sigurnost uvek na prvom mestu najbolje je da kontaktirate stručno lice ukoliko niste sigurni kako da utiplujete kuke na plafon ili nemate odgovarajući alat. Ovo je samo jedan od načina kako je moguće okačiti ljuljašku, u zavisnosti od toga kakve kuke i šrafovi su vam dostupni.
Montaža u kući
1. Kada ste pronašli idealno mesto, označite gde ćete bušiti rupe za šrafove
2. Za bušenje betona će vam biti potrebna hilti bušilica, dok za drvenu gredu odgovarajuća burgija
3. Za betonski plafon su potrebni tiplovi za beton, dok za drvenu gredu se šrafe odgovarajući šrafovi.
4. Za montažu se preporučuju dve kuke na razdaljini od oko 35cm jedna od druge. Na kuke se kače užad ili daisychain koji dolaze u kompletu, kao i karabinjer preko koga kačite ljuljašku za uže i podešavate visinu po potrebi.
U slučaju da imate plafon od monte, šupljog bloka, ne brinite ima rešenja i za to- pogledajte snimak takve montaže i šta vam sve treba od materijala.
Mi ne radimo montažu ali svakako nas pozovite ukoliko imate bilo koje pitanje ili nedoumicu - posavetovaćemo vas! - 0637511796
Naša preporuka za majstora koji može da vam montira ljuljašku na teritoriji Beograda:
Đole 063 339 401